JET RSB Nozzle | 0.6mm r3d Dual Extrusion

Dual Extrusion

Every part to assemble an Ultimaker Original or Ultimaker Original+

this will greatly improve the life of your nozzle

GF30-PA6 is a reinforced PA6 nylon filament with 30% glass fiber that is up to 250% stronger than carbon fiber reinforced ABS

Designed and tested to work with different PA (nylon) and fiber reinforced filament brands

JET RSB Nozzle | 0.6mm r3d Dual ExtrusionThe JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside, due to a special treatment. PRINT 3 5 degrees lower because they are so slippery inside, to eliminate dripping. JET RSB nozzle is available in sizes: 0. 25mm 0. 40mm 0. 60mm 0. 80mm WHY JET RSB? These new nozzles are meant for Speed! Plastic will flow more easily than in most other