SRAM UDH Dropout Bushing, Titanium, 0.5mm Eccentric bbshell Concentric: use a 0 mm

Concentric: use a 0 mm offset bushing

The chainstay center MUST be 3

No derailleur hanger for single-speed applications

Foundations: Brazing is a 2-day seminar focused on the silver and bronze brazing techniques used in bicycle framebuilding

is not meant to be consumer serviced

SRAM UDH Dropout Bushing, Titanium, 0.5mm Eccentric bbshell Concentric: use a 0 mmMaterial: 6 4 titanium Style: Eccentric, 0. 5 mm Four 2. 2 mm radial holes on the flange Use a 2 mm hex key to rotate the insert, using the radial holes on the flange Application: Fits the right side of our titanium SRAM Full Mount UDH eccentric round, rear dropouts Allows for fine tuning wheel alignment in the frame following frame construction The bushing: Must be welded in Once installed, is not meant to be consumer serviced Is a structural part of