VT 65/4/125 C.341 (1,1 kW, 400 V) pompa zatapialna Pompa do wykopu Set of plugs: 2 pcs

Set of plugs: 2 pcs

Inside the tanks there are rubber diaphragms made of butyl (produced in an Italian factory)

Dławnica mechaniczna: SiC / CAR

The pump is intended for non-aggressive liquids with a low content of non-abrasive solid impurities

The pumps operate only with clean water - the medium must not contain solid particles or abrasive agents that could damage the brass impeller and mechanical seal

VT 65/4/125 C.341 (1,1 kW, 400 V) pompa zatapialna Pompa do wykopu Set of plugs: 2 pcsThe 4 pole VT series is used for pumping particularly heavy sewage liquids. High efficiency and large passages make this series suitable for use in industry, zootechnics, sludge transport, tanneries and wherever there is a need to pump liquids containing large solids. Characteristics All main components are made of GG25 cast iron. Two separate mechanical seals (motor side in the oil chamber, impeller side in contact with the liquid) and high quality