vattentät Lödskarv krympskarv lödhylsa med invändigt lim 1 Red up to 1.5mm2:1pc White up to 0.22mm2 should be replaced with a

should be replaced with a new one when necessary / according to the interval

built-in fill light

The filter is for single use and should be replaced at reasonable intervals

000 hours Areas of use: Sidelights Reading lights Car lights Door lights Instrument lights License plate lights

Kamerahuvudet har steglöst justerbar höjd upp & ned med vred på båda sidor om stativet tillverkat i metall

vattentät Lödskarv krympskarv lödhylsa med invändigt lim 1 Red up to 1.5mm2:1pc White up to 0.22mm2 should be replaced with aPractical and easy to use splice sleeve that solders, glues and shrinks two cables in one step. For a strong, thin and waterproof (IP67) cable joint. The sleeve has three internal rings, one in the middle with solder that melts when heated to 138 150 C and two colored melting rings that make the joint moisture and watertight. Strip and insert both cables and lightly press the solder together to hold the cables in place, then heat with a heat gun or