loveless bolt Type:Steel where a thick cast is

where a thick cast is needed

Kydex kan varmes opp til omtrent 150–200 °C og formes rundt kniven eller formen du arbeider med

Dette gir deg muligheten til å lage et unikt knivskaft med personlig preg

after 120 grit ceramic belts and up to 2500 grit

Mammut støttann skaftemne M167 er et helt spesielt materiale med en historie som strekker seg tusenvis av år tilbake i tid

loveless bolt Type:Steel where a thick cast isThe Loveless bolt, an ingenious solution for attaching grip plates to full tang blades. A shaft attachment system consisting of an M4 screw and two round nuts. How to use a Lovelessbolt Drill a 4mm hole for the bolt, and drill part way through the shaft plate with an 8mm drill bit so that the nut can seat in the shaft. Apply glue to the surfaces to be glued and tighten. Once the glue has hardened, sand the bolt flush with the shaft surface.